Category	Title	Grade	# views	Added	Pic.
Coatings	Metal anticorrosion fluorine silicon coating 1	0 (#0)	119	2007.09.21
Coatings	RTV Insulator Anti Flashover coating 1	0 (#0)	113	2007.09.21
Coatings	PRTV outside power equipment insulates with takes shape permanence anti flashover compound coating 1	0 (#0)	100	2007.09.21
Coatings	PRTV outside power equipment insulates with takes shape permanence anti flashover compound coating -	0 (#0)	116	2007.08.21
Coatings	Magnetron sputtering coating line for low-emission act wall glass Offer to sell Magnetron sputtering coating line for low-emission act wall glass Adopting the principle of magnetron sputtering E-discharge, this Vacuum Coating Production Line can coat metallic film or compound films on the surface of large-sized glass, such as act wall glass or architectural glass, forming the glass with characteristics of sunshine shelter, temperature-keeping, energy-saving, low emission and decoration, etc. that has been extensively used high-rank architecture, act wall and room decoration, etc. The production line is composed of glass-loading tipping rack, glass washing machine, attendant chamber, pre-pumping chamber, buffer chamber, sputtering coating chamber, output buffer chamber, output pre-pumping chamber, output washing machine, on-line inspection, un-loading tipping rack and control board system. Work principle: This machine can produce reflective and lower irradiant architectural glass or act wall glass. By the principle of sputtering technique under magnetic field, some film is coated on the surface of large plate glass such as single metal film, alloyed film, metal compound film. The coated glass has function or effect of sunlight prevention, heating preservation, energy saving and decoration. By magnetron sputtering reactive coating technique, it can also coat or metallize various color films or iridescent film on glass. By reactive coating technology and change of different target materials, the machine can make glass of any color such as silver, dark brown, sapphire, gilded, etc. It can also produce the imitation of ancient copper glass and of golden glass. Its production capacity as below: First, 3 or 6 magnetron sputtering power sources can be installed in the machine so as to meet the different technical requirements. Second, multi-films coating can be achieved simultaneously and automatically by sputtering reactive coating or by evaporation coating. Just the glass goes through the machine from input to output and the whole work has been done. Third, it is equipped with magnetron sputtering power source, gas mass flow gauge and speed control adjustable, guaranteeing the uniformity and consistence of coating quality. Fourth, with iridescent coating system in it, it ensures the property of coating film with evenness, good adhesion, high hardness as well as fine corrosion resistance. Example: JT-2500 Magnetron Sputtering Coater with movable targets for wall glass Adopted international advanced technology with movable magnetron sputtering targets, the equipment can coat on heat reflecting architectural glass the single layer film or compound films with advantages of tight adhesion, corrosion resistance, evenness and mild color. The equipment of new generation with multi-functions, superior in stable performance and easy manipulation with lower energy consumption, is an ideal machine for vacuum coating industry. Its main technical data is as following: 1, Dimension of Chamber: 3300X2100X900mm 2, Ultimate Pressure: 3X10-3Pa 3, Pump Time: Less than 10 minutes 4, Size of Glass to be coated: 2500X1680mm 4 pcs 5, Sputtering Power: 30KW 6, Heating Power 27KW 7, Normal Total Power: 127KW 8, Target Moving Speed: 0.5~3m/minute (Adjustable) 9, Production capacity: 20 minutes/4 pcs, 100000~160000 square meters of glass per year 10, Floor Space: 10X5 square meters Contact person: Alex Li Tel: 86 758 2802710 Fax: 86 758 2855892 Mobile: (86) 13929890858 Email: vacuumsale@hotmail.com MSN: vacuumsale@hotmail.com Website: www.vacuummetallizer.com	0 (#0)	218	2007.03.03
Coatings	Silane Coupling Agent Silane Coupling Agent Chemical Name: Gamma-Chloropropyl Triethoxysilane Molecular Formula:Cl(CH2)3Si(OC2H5)3 Properties: Colorless transparent liquid,soluble in organic solvent such as alcohol, ketone and benzene, hydrolyze when meeting water. CAS No.: 5089-70-3 Molecular Weight:240.5 Boiling Point:220Centigrade Density(¦Ñ20)g/cm3:1.415 Refractive Index:1.001 Application: (1) It is main material to produce Si-69, JH-A110 silane coupling agent and a variety of silicone materials. (2) As a kind of rubber process auxiliary agent, it can be used to couple inorganic fillers in a variety of halogenated rubber, such as: neoprene rubber, chlorobutyl rubber, chlorosulfonated polyethylene rubber and so on, to produce light-color products to improve various physical and mechanical properties. (3) Also applied in anti mildew smell finishing agent, antistatic agent, blood coagulant agent. Packing and storage: Packing: 200KG/drum or other packing on request. This product must be sealed and kept in cool & ventilated place.	0 (#0)	183	2006.09.20
Coatings	The organosilicon is flame-resistant the heat conduction high voltage insulation coating The organosilicon is flame-resistant the heat conduction high voltage insulation coating ² Characteristic and performance The FR60 series organosilicon is flame-resistant the heat conduction high voltage insulation coating is coordinates other polymers and the high performance material by the special organosilicon rubber but becomes through the polymer alloy technology preparation, has the following remarkable characteristic: ——The insulation performance is outstanding, effectively ceases the transformer substation universal existence the micro-organism short-circuits the person which the breakdown and charged naked creates to injure the accident; ——The heat conduction performance is fine, prompt releasing arrangement quantity of heat, prevents the heat energy accumulation and the hyperpyrexia, not flammable has from extinguishes the nature, is flame-resistant the effect to be remarkable, reaches the FV-0 level; ——High strength, high adhesion, elimination coating and equipment air gap, Prevents the acid, the alkali, the salt and the atmosphere to the material corrosion; ——Moisture-proof, hydrophobic water repellency , Bears the ozone, bears the ultraviolet ray, Bears the radiation, Bears the aging, May realize exempts the maintenance long period movement; ——Takes shape, the easy to operate, suits in the heterogeneous type equipment and the component surface protection and special electric contact spot insulation protection processing. ² Qualification This in view of the electricity, the electric power and the related profession to the equipment and the primary device insulation protection, the heat conduction, is flame-resistant with the heat resistance is moisture-proof and so on the request, drew up the enterprise standard "Organosilicon To be flame-resistant heat conduction High Voltage Insulation Coating Technical standard" (Q/SV 11-2001), The routine inspection and the pattern examine qualified (for details sees technical specification data sheet) completely. ² Range of Application Is suitable loses in the electrical power Transmission system in the High Voltage the mother to arrange, to put on the wall drive pipe, the high efficiency electrical machinery, the dry type transformer, the switch cabinet, outside the electric cable prime need insulates, the heat conduction, is flame-resistant, the moisture-proof protection equipment and the primary device. To the electrical part which in contamination, in the moist environment works especially is suitable. This has the fine construction characteristic, Carries on to the geometry shape complex primary device surface spreads seals the protection effect to be remarkable, Its physics and chemistry target performance surpasses hotly contracts the drive pipe. Operation guide To be spread the spot surface to carry on the convention to sweep clear, decontamination and degreasing, fat processing, cleanly maintains its surface to be clean. This is the single component coating, evenly spread with the hair brush either the same tool spreads in is spread the equipment or the primary device must protect the spot. Spreads brushes a coating thickness is 0.5 millimeter generally, may according to the actual need, grasps spreads brushes the number of times and rubber level thickness. The coating should leak proof spread, not dribble, does not hang the silk. When the coating uncaps the use, if has not used up, Should turn off the lid immediately, the seal preservation next time again will use. ² Package , storage , and transportation The product packing or models in the feeding trough in the airtight metal flexible hose, When storing maintains dry and ventilates, prevented all day exposes to the sun, the rain drenches, The storage time is 6 months, after surpasses the storage time, after duplicate examined qualified still may use. According to non- dangerous material storing and transportation. FR60 series organ silicon is flame-resistant the heat conduction high pressure insulation coating Technical index Chart Number Items Standard Index Accordance with test 1 outward appearance Red, is green, yellow, and white Sticks the thick mobile liquid GB 1721-79 2 viscosity （CP） 5000~10000 GB 265-88 3 Vulcanizing time （25℃ RH50%） a. surface dry up time ≤30min b. full dry up time ≤48h GB 6753.2-86 4 tensile strength （MPa） ≥1.5 GB 528-76 5 Pulls apart the elongation ratio (%) ≥150 GB 528-76 6 Adhesion Ability (cycling method, Level ) 1~2 GB 1720-89 7 Hardness （邵氏） ≥20 GB 531-76 8 Anti Flaming value Conforms to the FV-0 level IEC 60707:1981 9 Coefficient of thermal conductivity （w/m•K） ≥0.15 GB 11205-89 10 Volume Electric resistance （Ω•m） ≥1.0×1014 GB 1410-78 11 Surface Electric resistance （Ω•m） ≥1.0×1012 GB 1410-78 12 breakdown field strength （MV/m） ≥18 GB 1408-78 13 The heat resistant denaturation (-40~200℃/2.5h•5 delimits circle law determination from now on) Is not bigger than 2 levels DL/T627-1997 14 Artificial accelerate ageing 1000h appraise No less middle degree GB 1865-80 15 Chemical reagent resistance (Acid, alkali, salty reagent function) Does not have the skin, falls off, bubbles, changes color and so on the phenomenon GB 1763-89 16 operational temperature range -50℃~200℃ In fact application appraise	0 (#0)	325	2006.07.28
Coatings	PRTV Outside the power equipment insulates with takes shape the permanence anti flashover the compou PRTV Outside the power equipment insulates with takes shape the permanence anti flashover the compound coating Outside the power equipment insulates with takes shape the permanence anti flashover the compound coating, Is one kind of electrical power system uses the new electrical function material, Is specially for the electrical network and each round, loses, uses electricity the customer to be lasting eliminates the equipment flashover thoroughly the hidden danger but to design; Develops jointly by the North China electric power academy of science with our company successfully. The product has the unique chemical composition and the structure, Achieved and surpasses the heat vulcanization silica gel physics electrical specification, Overall performance and so on more outstanding water repellency nature, As well as 20 years design service life has provided one kind of new technical measure for the electric porcelaneous equipment permanence counter- dirt. 2 Product execution qualification This uses the North China electric power group company standard "Outside the Power equipment To insulate with Takes shape the Permanence Anti flashover the Compound Coating (PRTV) To use Leads Then", With Hebei silicon valley chemical industry limited company standard Q/HGH 019-2004 “Outside PRTV Power equipment Insulates with Takes shape Permanence Anti flashover Compound Coating" to organize the product the production and the construction. 3 Range of application This product mainly uses in the electrical power system transformer substation and the transmission line insulator, the power plant and the electric power user changes outside the electricity equipment as well as other electrical equipments insulates lastingly anti flashover . After the porcelain (or glass) the insulator uses this product, Forms the porcelain (or glass) the skeleton complex effect, Enhances one kind of standardized disposition plan which outside the power transformer equipment insulates. Is suitable in alternating and direct circuit system rated voltage 1~750kV, Environment Temperature -50℃~ +50℃, Under the contamination condition moves outside the transformer substation and the impractical transmission line equipment insulates antifouling, Prevention flashover, Enhances the equipment outside to insulate the rank. 4 Operation guide To porcelain (or glass) insulator superficial thorough clear dirt, Removes the contamination, the fat and other attachments, After waits the electric porcelaneous surface pure to be dry, May use to spurt spreads or brushes spreads and so on to spread spreads the method to carry on the construction, Coating thickness is 0.5 ~ 0.6mm, the coating should leak proof spread, not dribble, does not hang the silk, The surface is smooth, levels also does not have the air bubble. Originally has used the RTV equipment, Should be clean the unreliable attachment cleaning up, remove the contamination, After uses the special-purpose processing medicinal preparation to clean, Again executes spreads PRTV. 5. Package and storage This product packing in airtight metal container, When storing and transportation should maintain dry and ventilates, Prevented all day exposes to the sun, the rain drenches. The storage time is 1 year, Duplicate surpassed the storage time after to examine qualified still may use When the coating uncaps the use, if has not used up, Should cover securely immediately the airtight preservation. PRTV Outside the power equipment insulates with takes shape the permanence anti flashover the compound coating technology parameter data sheet Items Q/HGH 019-2004 Standard Technical Property （Test） Test method Outward appearance; Does not have the obvious mechanical impurity and the cotton wool shape, The coating should level, be smooth also does not have the air bubble Toughness liquid, Does not have the impurity and the cotton wool shape, The coating is smooth also does not have the air bubble GB 1721-1979 Viscosity s 100~200 160 GB 1723-1993 Dielectric Strength kV/mm ≮25 32.3 GB 1408-1978 Surface resistivity Ω·m Volume resistivity Ω·m ≮1×1012 4.25×1013 GB 1410-1978 ≮1×1014 2.92×1015 Relative permittivity dielectric lose tangent value ≯3.0 2.7 GB 1409-1978 ≯0.3% 2.5×10-3 Arc resistance s ≮180 217 GB 1411-1978 Bears leaks The mark And the Electricity Wear and Tear AC Alternating current ≮TMA 4.5 1A 4.5 GB 6553-1986 DC Direct Current ≮TMA 3.5 1A3.5 Adhesion ability Cementation shearing strength MPa ≮3.0 4.7 GB 13936-1992 Cycling method level No less 2 level 1 GB1720-1989 Abrasion resistance g ≯0.05 0.035 GB 1768-1989 Ratio of Water absorption % ≯0.25 0.15 GB 1738-1989 Hydrophobicity Hydrophobicity and level Qav≥100°Qmin≥90°HC1~2 106°~109° HC1 DL/T810-2002 Lose property 96h Qav≥90°Qmin≥85°HC3~4 Non showing loss recovery characteristic t≤24h / Water repellency characteristic 96h Qav≥110°Q min≥100°HC2~3 14 h Hydrophobicity reach HC1 110°~115° Erosion Resistance Test Acid , alkali and salt , 80℃24 h Does not have the corrugation, falls off, bubbles, changes color and so on, The adhesion is not lower than 2 levels Does not have the corrugation, falls off, bubbles, changes color the phenomenon, The adhesion is 1 level GB 1763-1989 transformer oil 105℃24 h Does not have the corrugation, falls off, bubbles and so on, The adhesion is not lower than 2 levels Does not have the corrugation, falls off, bubbles the phenomenon, The adhesion is 1 level GB 1739-1989 Labor frequency arc-over voltage Dry arc-over voltage kV Has the coating insulator not to have the coating insulator not to have relatively to reduce Paint-coat 79.2 , no 75.9 GB 775-1987 Wet arc-over voltage kV Paint-coat 61.9, no 55.9 Flashover resistance test U1(have paint-coat )/U2(no paint-coat )≥2.0 U1 /U2 =2.23 GB 4585.1-1984 Heat resistant denaturation experiment -40℃~+80℃，2.5h×5 times The coating should not damage, The adhesion inspection is not lower than 2 levels After the experiment the coating does not have bubbles, the dehiscence, falls off, Adhesion 1 level DL/T627-1997 Salt Spray test 1700 h The test specimen does not surpass 3 time has flowed the severance After 1800h，Does not have has flowed the severance GBT5892-2003 GB/SV023-2003 Does not have leaks the mark, The electricity wear and tears have not reached the porcelain glaze Does not have leaks the mark, The wear and tears have not reached the glazed surface Hydrophobic migration characteristic HC2~3 level HC1~2 level A row line of experiment passes ≥3.0MPa 3.5 MPa Flame Resistance FV-O level FV-O level GB/T13488-92 The longitudinal strength and pulls apart the elongation ratio Strength MPa ≮4.0 5.5 GB/T528-1988 elongation % No less 350 390 peel strength kN/m ≮12.0 17.5 GB/T529-1988 Hardness (邵氏) 35~55 46 GB/T531-1999 Sulficadion time Surface Dry up min 20~50 35 GB6753.2-1986 Full dry up h ≯72 65 storage stability 50℃ ≥45days After 60 days ，A row line of experiment passes GB6753.3-1986 Self Clearance property [Only requests antifouling] After the dirty fluid cementation is dry, Strips the intensity ≯3kPa(1 level ) Peel off strength 2.3kPa(1 level ) QB/SV021-2003 Anti –icing property [Only requests to guard against the ice] Anti- regelation (measure) Paint-coat ice cover measure /no paint-coat ≯30% 18.3% QB/SV022-2003 Dehydration property DC value ≮90% 91.2%	0 (#0)	304	2006.07.28
Coatings	RTV insulator antifouling Flashover the coating elelctric power transmission system insulation use well	0 (#0)	300	2006.07.28
Coatings	10th China International Fashion Trading Fair s	0 (#0)	259	2006.04.26
Coatings	Sell Pipeline Coating Reinforcement Mesh Sell Pipeline Coating Reinforcement Mesh	0 (#0)	402	2006.02.11
Coatings	ALUMINUM COMPOSITE PANELS JINXIANG ALUMINUM -PLASTICS BUILDING MATERIALS MAKING FACTORY is high qualified manufacturer and exporter	0 (#0)	658	2005.12.08
Coatings	timberland boots ,latest 2005 wholesell 55$/pair model www.e-buybuy.com WWW.e-buybuy.com---We are big shoes manufacture in china .we supply many kinds of shoes, as Nike shoes, Jordan 1-21, Air Jordan dz , AF1, DUNK ,TURBO,BAPESTAR air max series etc. Most of them are in stock which to be sure supply on time. And all shoes ar	0 (#0)	718	2005.11.12
Coatings	pvc coating diamond netting in sale We are a professional enterprisein wire mesh industry,we are in a propertion to produce various nettings,including pvc hexagonal mesh,this product is adopted advanced skill,having weather-resistance,aging-resisting,wear-resisting,beautification,environmen	0 (#0)	1048	2005.05.23
Coatings	colorful powder coatings Dear Sir or Madam, Jiangsu Hua Guang Powder Coating Co.,Ltd. is one that collects scientific research, develop , production, manage in integrative modernized enterprises in powder coatings in China. Have already developed into one of China's 3 major br	0 (#0)	1083	2005.04.13
Coatings	AQUA JETCOAT II (working) Distributor pricing on request.	1 (#1)	1522	2004.12.24
Coatings	AQUA JETCOAT II Distributor pricing on request.	1 (#1)	2045	2004.12.24

Prev 30  1 Next 30

Übersicht Seite 1 von 1

x100 Übersicht Seite:  1